Introduction
This post is very similar to my friend’s previous post based around an automated WordPress installation, however just to quote him “It won’t work on Windows, so sell it and buy a Mac.” I wanted to explore if a similar process could be implemented for Windows.
Granted bash can still be run on Windows, with command line interpreters such as Cygwin or a virtual machine but who really wants to bloat their PC with third party programs?
Using Batch alongside WP-CLI we can automate the installation of WordPress as well as various other housekeeping tasks.
Getting ready!
For this to work you will need to install php , composer and WP-CLI, forget about their guide as we are going manual for this (it’s Windows after all)!
I won’t cover how to install php as there are plenty of tutorials on how to achieve this, plus installing php is out of the scope of this post.
To install wp-cli you first have to download the phar file you can do that here wp-cli.phar place this file in a logical place for instance mine is C:\wp-cli\wp-cli.phar now you can run this in the cmd by typing php C:\wp-cli\wp-cli.phar however, that is far too long to type out.
To fix this we have to set up a batch file in the same directory, this will act as an alias for the phar file. Name the file wp.bat and paste the following into the contents of the file.
@ECHO OFF
php "%~dp0wp-cli.phar" %*
Once you have WP-CLI where you want it, you will need to allow windows to access its commands globally, to do this we will need to amend the Path environment variable.
Navigate to your System’s Properties by either Pressing and holding down the start key and pressing Pause/Break, alternatively you can open the start menu, right click computer and select properties.
On the left, click advanced system properties, this will load a system properties dialog box from here select the tab labeled Advanced. Click Environment Variables, under the System variables section scroll down to the variable named Path and edit it.
Under the variables value append the path to your WP-CLI’s folder, not forgetting the ; at the end of each path for example mine is ;C:\wp-cli
When you add in the path be sure there are no spaces between the previous and added path! (Credit to Peter Sorensen)
Confirm all of the dialogs and test it out.
Go to the command line and type wp you should see a list of commands if not you may require a reboot or your path maybe incorrect!
Getting Set!
Ok, so you have WP-CLI Installed and you’re getting ready to automate the WordPress installation on Windows!
This next part is a little more specialized and tailor made to each PC however I have added my code to show you the concept feel free to use it don’t forget to edit the paths!
Pretty urls did prove to be a pain to get working while making this script fortunately I found a great fix by specifying a new environment variable WP_CLI_CONFIG_PATH I was able to enable apache’s mod_rewrite more about wp-cli’s config here
WP_CLI_CONFIG_PATH=%USERPROFILE%\.wp-cli\config.yml
You will need to create the config.yml file in the designated path and enable apache’s mod_rewrite by adding the following to the file:
apache_modules:
- mod_rewriteTo use the code below will require you to setup an “alias”, which in short means updating your PATH environment variable to include the folder where you store the script. This way you can access the file anywhere you are in the file system like so: install projectname “install” is the name I gave my bat file and “projectname” is the name of the new project.
If you want to use this code for your own benefit remember to change the Important variables to match your local hosting solution.
@echo off
:: FOR THIS SCRIPT TO GENERATE PRETTY URLS YOU MUST ADD WP_CLI_CONFIG_PATH=%USERPROFILE%\.wp-cli\config.yml to your user/system environment variables
:: in config.yml you must specify apache_modules: - mod_rewrite
:: Important variables
SET ROOT=C:\www
SET DBUSER=root
SET DBPASS=root
SET USER=ltconsulting
SET EMAIL=wpadmin@indigotree.co.uk
:: Password Generator
Setlocal EnableDelayedExpansion
Set _RNDLength=10
Set _Alphanumeric=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789
Set _Str=%_Alphanumeric%987654321
:_LenLoop
IF NOT "%_Str:~18%"=="" SET _Str=%_Str:~9%& SET /A _Len+=9& GOTO :_LenLoop
SET _tmp=%_Str:~9,1%
SET /A _Len=_Len+_tmp
Set _count=0
SET _RndAlphaNum=
:_loop
Set /a _count+=1
SET _RND=%Random%
Set /A _RND=_RND%%%_Len%
SET _RndAlphaNum=!_RndAlphaNum!!_Alphanumeric:~%_RND%,1!
If !_count! lss %_RNDLength% goto _loop
Set PASSWORD=!_RndAlphaNum!
:: Was an argument passed?
IF [%1] == [] GOTO fatal
echo.
echo.
echo __ __ __ ____
echo /\ \ __/\ \ /\ \/\ _`\
echo \ \ \/\ \ \ \ ___ _ __ \_\ \ \ \ \ \_ __ __ ____ ____
echo \ \ \ \ \ \ \ / __`\/\`'__\/'_` \ \ ,__/\`'__\/'__`\ /',__\ /',__\
echo \ \ \_/ \_\ \/\ \L\ \ \ \//\ \L\ \ \ \/\ \ \//\ __//\__, `\/\__, `\
echo \ `\___x___/\ \____/\ \_\\ \___,_\ \_\ \ \_\\ \____\/\____/\/\____/
echo '\/__//__/ \/___/ \/_/ \/__,_ /\/_/ \/_/ \/____/\/___/ \/___/
echo.
echo --------------------------------------------------------------------------------
echo Install Wordpress 4.0
echo.
:: Navigate to the local project folder
cd %ROOT%
:: Set the name of the new install
SET NAME=%1
:: Set the name of the new install
SET DBNAME=wp_%NAME%
echo.
echo --------------------------------------------------------------------------------
echo Installing WordPress..
echo.
:: Create directory
mkdir %NAME%
:: Go into directory
cd %NAME%
:: Download Wordpress
call wp core download
:: Generate wp-config
:: We need to escape the php we pass in to the wp-config or we will get syntax errors
(echo define^^^('WP_DEBUG', true^^^);^
& echo define^^^('DISALLOW_FILE_EDIT', true ^^^);) | wp core config --dbname=%DBNAME% --dbuser=%DBUSER% --dbpass=%DBPASS% --extra-php
:: Create DB
call wp db create
:: Install wordpress
call wp core install --url="http://localhost/%NAME%" --title="%NAME%" --admin_user="%USER%" --admin_password="%PASSWORD%" --admin_email="%EMAIL%"
echo.
echo --------------------------------------------------------------------------------
echo Cleaning Plugins
echo.
:: Discourage search engines
call wp option update blog_public 0
:: show only 6 posts on an archive page
call wp option update posts_per_page 6
:: Delete akismet and hello dolly
call wp plugin delete akismet
call wp plugin delete hello
:: Add our own plugins here
echo.
echo --------------------------------------------------------------------------------
echo Installing Lt-theme
echo.
:: set pretty urls
:: we set pretty urls here to give it some time to complete before flushing the permalinks later
:: unfortunatly call does not work on this command so we have to open and run in a seperate cmd window
start cmd /c wp rewrite structure /%%postname%%/ --hard
:: Add and activate your own themes here
:: Clear Window
cls
:: ASCII ART
echo.
echo.
echo.
echo __ __ __ ____
echo /\ \ __/\ \ /\ \/\ _`\
echo \ \ \/\ \ \ \ ___ _ __ \_\ \ \ \ \ \_ __ __ ____ ____
echo \ \ \ \ \ \ \ / __`\/\`'__\/'_` \ \ ,__/\`'__\/'__`\ /',__\ /',__\
echo \ \ \_/ \_\ \/\ \L\ \ \ \//\ \L\ \ \ \/\ \ \//\ __//\__, `\/\__, `\
echo \ `\___x___/\ \____/\ \_\\ \___,_\ \_\ \ \_\\ \____\/\____/\/\____/
echo '\/__//__/ \/___/ \/_/ \/__,_ /\/_/ \/_/ \/____/\/___/ \/___/
echo.
echo --------------------------------------------------------------------------------
echo Installation is complete. Your username/password have been added to your clipboard and are listed below.
echo.
echo Username: %USER%
echo Password: %PASSWORD%
echo.
echo have a nice day :)
echo.
:: Add to clipboard
echo Username: %USER% Password: %PASSWORD% | clip
:: start the project in browser
start http://localhost/%NAME%
:: unfortunatly call does not work on this command so we have to open and run in a seperate cmd window
start cmd /c wp rewrite flush --hard
pause
goto:eof
:fatal
echo.
echo --------------------------------------------------------------------------------
echo Please specify a name for your WordPress Install
echo.
goto:eof
:END
Extra credit
You can add your own themes from github/bitbucket using git clone!
:: Go to themes directory
cd wp-content/themes
:: pull down the theme
call git clone https://github.com/vafour/vafpress-framework-theme-boilerplate.git new-theme
:: Navigate into the theme
cd new-theme
:: Remove the generated git folder
rmdir /s /q .git
:: Run package installers if your theme requires it
:: call npm install
:: call gulp
cd %ROOT%/%NAME%
:: Activate the theme
call wp theme activate lt-theme
Go!
It doesn’t stop with installation you can perform many other tasks such as backups, plugin management, manage posts and many other commands the full list can be found here: WP-CLI
I have recently used this same technique to transfer WordPress sites from my development machine to a server.
By using 7zip’s command line interface I can zip my files up send them to a server where a php file unzips the files to the root. (Useful stuff!)
In an ideal world I would use git to manage my files, however some hosting companies don’t have git integration or web hooks yet.
Hopefully this post will give you a good understanding of how powerful and flexible WP-CLI can be.
Please feel free to take this and expand on it!